Qt Slot Thread-safety
2021年5月2日Register here: http://gg.gg/ugi8m
*. Thread safety! Qt signal/slots - ITK events. Handle exceptions. Take care a exception is actually thrown!. Then throwing it from one thread to another is possible using Qt means (QtConcurrent::Exceptions). isCanceled can help to check whether a thead was aborted.::run does not necessary start the thread.
*In this case if you emit a signal from one thread, and catching it in another one (e.g. In main GUI thread) - Qt will put a slot’s call to the message queue and will make all calls sequentially. Read this for further info - http://qt-project.org/doc/qt-4.8/threads-qobject.html#signals-and-slots-across-threads.
*Qt’s event system is very useful for inter-thread communication. Every thread may have its own event loop. To call a slot (or any invokable method) in another thread, place that call in the target thread’s event loop. This lets the target thread finish its current task before the slot starts running, while the original thread continues running.
*Qt Virtual Slot
*Qt Thread Example opencv qobject::movetothread: current thread is not the object’s thread
opencv qpixmap must construct a qapplication before a qpaintdevice
importerror libqtgui 903938cd so 4.8 7 cannot open shared object file no such file or directory
I’m trying to use threads in Qt to delegate some work to a thread, but I can’t get it to work. I have a class inheriting QMainWindow that have a member object that launch threads to do work. This object has the QMainwindow as parent. It contains and initialize notably another QObject, the m_poller, which I want to move to the thread I create :
I followed the guidelines about how to manage thread in Qt without subclassing it (aka not doing it wrong), but I still get the following message in VS :
QObject::moveToThread: Current thread (0x2dfa40) is not the object’s thread (0x120cf5c0). Cannot move to target thread (0x1209b520)
Qt’s event systemis very useful for inter-thread communication. Every thread may have its own event loop. To call a slot (or any invokablemethod) in another thread, place that call in the target thread’s event loop.Qt Virtual Slot
I found the following post that seems to deal with the same issue, but couldn’t fix my code with the answer. I feel like I’m actually calling moveToThread correctly (as in I don’t call it from within another thread to ’pull’ an object to it), but apparently I’m still missing something there: as the message hints, it seems there’s already multiple thread and my call to moveToThread() seems to end up in the wrong one (though I admit I’m completely new to this and could figure this out completely wrong..)
So what could still be possibly wrong with the way I use Qt threads ?
Thanks !
Qt Multithreading in C++: The Missing Article, What Qt spec says about thread-affinity: timers started in one thread, cannot be The idea is simple: we use a signal/slot mechanism to issue requests, and the worker->moveToThread(thread); connect(this, &LogService::logEvent, worker, This is running on a windows 10 system with Qt 5.9.4 msvc 2015 64 / 32 bit. Description Creating a QFileSystemWatcher and then later calling QObject::moveToThread() on it or a parent will cause a crash when it is later deleted.
I think the problem is with the initialization of m_poller, which according to the error message seems to be assigned to a different (third) thread from the one that is executing your code snippet.
Also, if this code is executed multiple times, it may work the first time but then fail on subsequent times as m_poller no longer belongs to the executing thread, but rather m_pollThread.
How to use QThread properly : Viking Software – Qt Experts, The fundamental problem here is that most developers do not really Thread affinity has a bunch of subtle consequences for our objects, once you start going multithreaded. First, they use moveToThread(this) on the thread object. The QObject::moveToThread() function changes the thread affinity for an object and its children (the object cannot be moved if it has a parent). Calling delete on a QObject from a thread other than the one that owns the object (or accessing the object in other ways) is unsafe, unless you guarantee that the object isn’t processing events at that
You can also move it to your thread by doing it from the object’s owner thread.Qt Thread Example
You just need to call
movetothread in threadpool, How to move an object to a specific thread of a threadpool ? [Duplicate of https://forum.qt.io/topic/90726/movetothread-with-qthreadpool You set your QRunnable’s thread affinity correctly using QObject::moveToThread(). QObject: thread affinity Thread safety in Qt p.31 What about QObject? QObject itself is thread-aware. Every QObject instance holds a reference to the thread it was created into (QObject::thread()) We say that the object lives in, or has affinity with that thread We can move an instance to another thread by calling QObject::moveToThread(QThread *)
If you are moving your object through signals and slots (you have created your m_poller in one thread and called a signal and passed it to a slot of another object which is not in caller thread) make sure to use Qt::DirectConnection type for your connect. In this way your slot will execute in the caller thread and calling moveToThread is in the caller thread.
QObject::moveToThread() with child objects! [SOLVED], Regarding the second problem: Yes, but it also says: Changes the thread affinity for this object and its socket->moveToThread(thread);. As mentioned above, developers must always be careful when calling objects’ methods from other threads. Thread affinity does not change this situation. Tropicana casino parking atlantic city. Qt documentation marks several methods as thread-safe. postEvent() is a noteworthy example. A thread-safe method may be called from different threads simultaneously.
How To Really, Truly Use QThreads; The Full Explanation, Use a mutex or other method to safely communicate with the thread if necessary. Crown casino melbourne australia. Pingback: Issue with Qt thread affinity and moveToThread | The QObject::moveToThread() function changes the thread affinity for an object and its children (the object cannot be moved if it has a parent). Calling delete on a QObject from a thread other than the one that owns the object (or accessing the object in other ways) is unsafe, unless you guarantee that the object isn’t processing events at that
changing thread affinity properly, Hi there. I’d like to know what is the proper way of using moveToThread function. I have QTcpSocket object as a member of QThread derived Call exec() method to start an event loop. moveToThread (self. This is rather intuitive and easy to used. e. As the QThread::run() is the entry point of worker thread, so the former usage is rather easy to understand. Qt uses the timer’s thread affinity to determine which thread will emit the timeout() signal.
The Eight Rules of Multithreaded Qt, The biggest dos and don’ts for multi-threading in Qt language, and compiler to know how to avoid threading trouble-spots. Second You can only call moveToThread() on an object from the thread the object has affinity with. SQLAlchemy. 2 different relationships for 1 column. python,sqlalchemy. I’m afraid you can’t do it like this. I suggest you have just one relationship users and validate the insert queries.
Comments
*Could you please show the code where you create the m_poller object?
*I’ve read the Qt doc, and the m_poller object has actually no parent. The object that holds the m_poller has one on the contrary (but my post is quite ambiguous..)
*in this case everything seems right with your code, you can also check if QThread::currentThread() m_poller::thread() to make sure you’re using the moveToThread in a right way. What happens if you create m_poller object right before you use moveToThread?
*m_poller is a custom QObject which is initialized in the same object that then create the thread and call moveToThread() (I’ll edit for clarity).
*I have edited my answer to reflect the fact that this may still happen even if m_poller is orginially created in the ’main’ thread.
*How can the initialization ’assign’ m_poller to a different thread that the one it is initialized in ? (Note taken about the multiple executions of this code, very good point indeed, though this happens the first time the code is executed).
*Hard to say without knowing the code.. I think you will have to carefully track the execution of your code to see when the thread affinity of m_poller changes.Hot Questions
Register here: http://gg.gg/ugi8m
https://diarynote-jp.indered.space
*. Thread safety! Qt signal/slots - ITK events. Handle exceptions. Take care a exception is actually thrown!. Then throwing it from one thread to another is possible using Qt means (QtConcurrent::Exceptions). isCanceled can help to check whether a thead was aborted.::run does not necessary start the thread.
*In this case if you emit a signal from one thread, and catching it in another one (e.g. In main GUI thread) - Qt will put a slot’s call to the message queue and will make all calls sequentially. Read this for further info - http://qt-project.org/doc/qt-4.8/threads-qobject.html#signals-and-slots-across-threads.
*Qt’s event system is very useful for inter-thread communication. Every thread may have its own event loop. To call a slot (or any invokable method) in another thread, place that call in the target thread’s event loop. This lets the target thread finish its current task before the slot starts running, while the original thread continues running.
*Qt Virtual Slot
*Qt Thread Example opencv qobject::movetothread: current thread is not the object’s thread
opencv qpixmap must construct a qapplication before a qpaintdevice
importerror libqtgui 903938cd so 4.8 7 cannot open shared object file no such file or directory
I’m trying to use threads in Qt to delegate some work to a thread, but I can’t get it to work. I have a class inheriting QMainWindow that have a member object that launch threads to do work. This object has the QMainwindow as parent. It contains and initialize notably another QObject, the m_poller, which I want to move to the thread I create :
I followed the guidelines about how to manage thread in Qt without subclassing it (aka not doing it wrong), but I still get the following message in VS :
QObject::moveToThread: Current thread (0x2dfa40) is not the object’s thread (0x120cf5c0). Cannot move to target thread (0x1209b520)
Qt’s event systemis very useful for inter-thread communication. Every thread may have its own event loop. To call a slot (or any invokablemethod) in another thread, place that call in the target thread’s event loop.Qt Virtual Slot
I found the following post that seems to deal with the same issue, but couldn’t fix my code with the answer. I feel like I’m actually calling moveToThread correctly (as in I don’t call it from within another thread to ’pull’ an object to it), but apparently I’m still missing something there: as the message hints, it seems there’s already multiple thread and my call to moveToThread() seems to end up in the wrong one (though I admit I’m completely new to this and could figure this out completely wrong..)
So what could still be possibly wrong with the way I use Qt threads ?
Thanks !
Qt Multithreading in C++: The Missing Article, What Qt spec says about thread-affinity: timers started in one thread, cannot be The idea is simple: we use a signal/slot mechanism to issue requests, and the worker->moveToThread(thread); connect(this, &LogService::logEvent, worker, This is running on a windows 10 system with Qt 5.9.4 msvc 2015 64 / 32 bit. Description Creating a QFileSystemWatcher and then later calling QObject::moveToThread() on it or a parent will cause a crash when it is later deleted.
I think the problem is with the initialization of m_poller, which according to the error message seems to be assigned to a different (third) thread from the one that is executing your code snippet.
Also, if this code is executed multiple times, it may work the first time but then fail on subsequent times as m_poller no longer belongs to the executing thread, but rather m_pollThread.
How to use QThread properly : Viking Software – Qt Experts, The fundamental problem here is that most developers do not really Thread affinity has a bunch of subtle consequences for our objects, once you start going multithreaded. First, they use moveToThread(this) on the thread object. The QObject::moveToThread() function changes the thread affinity for an object and its children (the object cannot be moved if it has a parent). Calling delete on a QObject from a thread other than the one that owns the object (or accessing the object in other ways) is unsafe, unless you guarantee that the object isn’t processing events at that
You can also move it to your thread by doing it from the object’s owner thread.Qt Thread Example
You just need to call
movetothread in threadpool, How to move an object to a specific thread of a threadpool ? [Duplicate of https://forum.qt.io/topic/90726/movetothread-with-qthreadpool You set your QRunnable’s thread affinity correctly using QObject::moveToThread(). QObject: thread affinity Thread safety in Qt p.31 What about QObject? QObject itself is thread-aware. Every QObject instance holds a reference to the thread it was created into (QObject::thread()) We say that the object lives in, or has affinity with that thread We can move an instance to another thread by calling QObject::moveToThread(QThread *)
If you are moving your object through signals and slots (you have created your m_poller in one thread and called a signal and passed it to a slot of another object which is not in caller thread) make sure to use Qt::DirectConnection type for your connect. In this way your slot will execute in the caller thread and calling moveToThread is in the caller thread.
QObject::moveToThread() with child objects! [SOLVED], Regarding the second problem: Yes, but it also says: Changes the thread affinity for this object and its socket->moveToThread(thread);. As mentioned above, developers must always be careful when calling objects’ methods from other threads. Thread affinity does not change this situation. Tropicana casino parking atlantic city. Qt documentation marks several methods as thread-safe. postEvent() is a noteworthy example. A thread-safe method may be called from different threads simultaneously.
How To Really, Truly Use QThreads; The Full Explanation, Use a mutex or other method to safely communicate with the thread if necessary. Crown casino melbourne australia. Pingback: Issue with Qt thread affinity and moveToThread | The QObject::moveToThread() function changes the thread affinity for an object and its children (the object cannot be moved if it has a parent). Calling delete on a QObject from a thread other than the one that owns the object (or accessing the object in other ways) is unsafe, unless you guarantee that the object isn’t processing events at that
changing thread affinity properly, Hi there. I’d like to know what is the proper way of using moveToThread function. I have QTcpSocket object as a member of QThread derived Call exec() method to start an event loop. moveToThread (self. This is rather intuitive and easy to used. e. As the QThread::run() is the entry point of worker thread, so the former usage is rather easy to understand. Qt uses the timer’s thread affinity to determine which thread will emit the timeout() signal.
The Eight Rules of Multithreaded Qt, The biggest dos and don’ts for multi-threading in Qt language, and compiler to know how to avoid threading trouble-spots. Second You can only call moveToThread() on an object from the thread the object has affinity with. SQLAlchemy. 2 different relationships for 1 column. python,sqlalchemy. I’m afraid you can’t do it like this. I suggest you have just one relationship users and validate the insert queries.
Comments
*Could you please show the code where you create the m_poller object?
*I’ve read the Qt doc, and the m_poller object has actually no parent. The object that holds the m_poller has one on the contrary (but my post is quite ambiguous..)
*in this case everything seems right with your code, you can also check if QThread::currentThread() m_poller::thread() to make sure you’re using the moveToThread in a right way. What happens if you create m_poller object right before you use moveToThread?
*m_poller is a custom QObject which is initialized in the same object that then create the thread and call moveToThread() (I’ll edit for clarity).
*I have edited my answer to reflect the fact that this may still happen even if m_poller is orginially created in the ’main’ thread.
*How can the initialization ’assign’ m_poller to a different thread that the one it is initialized in ? (Note taken about the multiple executions of this code, very good point indeed, though this happens the first time the code is executed).
*Hard to say without knowing the code.. I think you will have to carefully track the execution of your code to see when the thread affinity of m_poller changes.Hot Questions
Register here: http://gg.gg/ugi8m
https://diarynote-jp.indered.space
コメント